Ambu WhiteSensor 4500M ECG Electrodes (Pack of 30)

Ambu Whitesensor 4500M Specifications:DimensionsView productElectrode size (length x width) | 50(mm) x 48(mm) Adhesive area | 1584 (mm2) Height excluding connector | 1(mm)SensorSensor material Silver | silver chloride (Ag/AgCl) Gel system  |Wet gel Gel area | 201 (mm2) Sensor area |79 (mm2)Electrical data (ANSI/AAMI)AC impedance – typical  | 95 Ω DC offset potential – typical | 1.0 mV Defibrillation overload recovery – typical | 12 mV Rate of change for polarisation potential – typical | 0.3 mV/s Combined offset instability and internal noise | 9 μV Bias current tolerance | 5 mVEnvironmentPVC-free electrode | Yes Electrode not made with natural rubber latex PVC-free packaging | YesX-Ray & MRIRadiolucent | Yes* MR Conditional | Yes***Shelf lifeOpened pouch | 30 days Sealed pouch 24 months**** from date of productionMaterials:ElectrodeBio-compatible | Yes Sponge | Polyester Polyurethane Reticulated Backing material | Polyethylene foam (PE) Backing material adhesive | Polyacrylate Supporting label | Polyethylene Connector | Graphite, snap type Upper substrate – Release liner | Polyester (PET) Stud material | Carbon filled ABS Connector | Connector – Carbon* Overlay material of the 4500M with graphite snap may cast shadows in radiographs with intensities greater than 50 kV.*** Static magnetic field of 1.5 Tesla and 3 Tesla only. Maximum spatial gradient field of 10.000 Gauss/cm or 100 Tesla/m. Maximum whole body averaged specific absorption rate (SAR) of 2 W/kg for 15 minutes of scanning.